Nickel 200, 201 Pipes, Tubes
NICKEL 200/201 PIPES SUPPLIER, NICKEL 201 TUBING, UNS N02200 TUBES, UNS N02201 PIPES SUPPLIER, DISTRIBUTOR
ALLOY 200/201 PIPES, WNR 2.4066, 2.4068 TUBES SUPPLIERS, TUBING EXPORTER, UNS N02200 TUBES, UNS N02201 PIPES
SEAMLESS ALLOY 200/201 TUBES, UNS N02200 SEAMLESS TUBES, UNS N02201 SEAMLESS PIPES, WNR 2.4068 TUBING
NICKEL ALLOYS |
TRADENAME |
UNS NO. |
WERKSTOFF NO. |
DENSITY ( G/CM3) |
Alloy 200 |
Nickel 200 |
UNS N02200 |
2.4066 |
8.9 |
Alloy 201 |
Nickel 201 |
UNS N02201 |
2.4068 |
8.9 |
Our Alloy 200/201 tube products can be offered in seamless, welded or welded and cold drawn form, depending on the alloy you require. Our Alloy 200/201 seamless and welded tubes size range starts at 1/2” NB or OD size and goes up to 6″ NB and OD.
We can offer Nickel Alloy 201 Tubing in random lengths of up to 6meters long or cut to a specific length as ordered. Nickel 200/201 pipes and tubes are largely used for piping in the caustic soda, food processing and hydrochloric plants.
With regards to the difference between Nickel 200 and Nickel 201, Nickel 201 carries lower carbon content resulting in lower hardness. The lower carbon content in Nickel 201 also makes the material more resistant to graphitization and also helps in preventing embrittlement. Nickel 200 is generally used for service up to 570° F (300 °C) to 600° F, meanwhile Nickel 201 is generally approved for service up to 1200° F to 1230° F.
Alloy 200, 201 seamless pipes and tubing’s are available in both OD and NB sizes. In addition to standard sizes, which are available in stock, our specialty is to manufacture and supply custom size Nickel 200, 201 cold drawn seamless tubing’s from our factory.
Specifications for Nickel Alloy 200/201 Seamless Pipes, Alloy 201 Tubing’s, UNS N02200, UNS N02201, WNR 2.4066, 2.4068
Nickel 200 / 201 Seamless Pipes and Tubes: ASTM B163, ASTM B161, ASME SB161, and ASME SB163
Nickel 200 / 201 Welded Pipes and Tubes: ASTM B725, ASTM B730, ASME SB725, and ASME SB730
Nickel Alloy 200/201 Seamless Pipes, Alloy 201 Tubing’s, UNS N02200, UNS N02201, WNR 2.4066, 2.4068 Supply, Stock Range
We can offer ex-stock supply of most of the standard size Nickel Alloy 200/201 alloy pipes and Nickel Alloy 200/201 tubes. Custom size (thickness x OD) Nickel Alloy 200/201 pipes can be offered with short delivery times to meet the most demanding requirements of our customers.
Products |
OD |
WT |
Length |
|||
Inch |
MM |
Inch |
MM |
Ft max. |
Mt max. |
|
Alloy 200/201 Tube |
1/2’’-3’’ |
12.0-76.2 |
0.02’’-0.5’’ |
0.5-12.0 |
105’ |
32.00 |
Alloy 200/201 Pipe |
NPS1/2’’-6’’ |
21.34-168.3 |
Sch10-Sch80 |
2.11-12.7 |
98’ |
30.00 |
Nickel Alloy 200/201 Seamless Pipes, UNS N02200 Tubing’s, UNS N02201, WNR 2.4066, 2.4068 Chemical Composition %
|
NI |
FE |
CU |
C |
MN |
S |
SI |
Alloy 200 Pipes, Tubes |
99.0 min |
.40 max |
.25 max |
.15 max |
.35 max |
.01 max |
.35 max |
|
NI |
FE |
CU |
C |
MN |
S |
SI |
Alloy 201 Pipes, Tubes |
99.0 min |
.40 max |
.25 max |
.02 max |
.35 max |
.01 max |
.35 max |
Typical Applications of Nickel Alloy 200/201 Seamless Pipes, Alloy 201 Tubing’s, UNS N02200, UNS N02201, WNR 2.4066, 2.4068
Manufacture and handling of food, soap, viscose rayon (synthetic fiber), sodium hydroxide, hydrochloric acid etc. Nickel 200 is generally used for service up to 570° F (300 °C) to 600° F, meanwhile Nickel 201 is preferred for service above 600° and up to 1230° F.